Quick Mill

Attack of the Killer Scale

Look, we’re not joking. Yes, there are a lot of things we poke fun at and crack wise about, but scale build-up in your boiler is absolutely not one of them. And it will never be — oh no, we are deadly serious about this.

Okay, not really, but scale build-up is often underestimated by folks. They think that by using filtered or bottled water, they won’t need to descale their espresso machine, and this just isn’t the truth. While these waters may have other impurities removed from them, they often have the same mineral content (and, in the case of bottled water, it may even be significantly higher, depending on the source) as your tap water. Using distilled water, water put through a reverse osmosis or a commercial-grade water design system like Cirqua are the primary methods for keeping lime and calcium from building up in your espresso machine’s boiler and related water works, but it’s important to note that mineral content in water does play an important role: It contributes to the flavor.

So if you don’t like the way the water from these treatment sources taste, how do you think it’s going to make your coffee taste? We recommend using water you like to drink to make espresso, which will often involve a regular descale to keep everything working well. Scale build-up will symptomatically show up as failure or very slow to heat up, not enough steaming pressure and/or leaking out of the steam wand and the brew head. Here in the Seattle area, we have pretty soft water, but other areas of the country have very hard water — and if you’re pulling straight from a well instead of the municipal water supply, you likely have a high mineral content.

A few months ago, we received a Rancilio Silvia V2 that was a few years old on a trade-in. The owner lived in Southern California and had never descaled the machine, so the guys put it through a commercial level descale just to start it off — high intensity citric acid was pulled into the boiler and allowed to sit overnight. When they came in the next day and rinsed it through, the machine was still exhibiting signs of scale build up, so they decided to crack it open to see if it was something more than scale. What they found is in the pictures accompanying this post — yes, this is scale build-up that was not able to be dissolved by the citric acid over a 24 hour period. The guys cleaned it out thoroughly and now it’s working just fine — and, obviously, this is representative of scale build up using the municipal supply in Southern California and will differ by region — but if the original owner had continued to use it without descaling, eventually everything would have burned out. It was caught just in time, however, so now it has a happy home somewhere else.

Not sure how to descale? Watch Gail descale a Rancilio Silvia and give tips on how to do this on other types of espresso machines.

Share

Make a Great Shot AND Maintain Your Boiler

The Rancilio Silvia often gets a bad rap out in the world because a lot of people consider it to be finicky or temperamental. One of the biggest issues it has is its temperature inconsistency, but this is something that all single boiler espresso machines suffer from — including the Ascaso Dream and even the high end Quick Mill Alexia, will all have some temperature issues simply because you’re pulling water for two different processes from the same boiler.

Additionally, you have to be cognizant of the fact that these single boilers don’t have automatic boiler refills and you need to make sure you’re keeping the boiler full of water in order to maintain its health. If you’re not keeping it full, it will slowly burn out the heating element and you’ll have a costly repair on your hands. One sign that you’re not keeping enough water in the boiler is that you might be having steaming issues — it’s not steaming powerfully enough, or it starts out fine and then peters off, or it’s just not getting hot enough.

In this video, Gail talks to us about temperature surfing, demonstrates it on a Saeco Aroma and describes what can happen if you don’t do this each time you make yourself a latte on your single boiler espresso machine.

Share

Ask the Experts: Oops! I Poured Water into the Bean Hopper – What do I do?

We’ve all had a few rough mornings where we’re not sure where the floor and ceiling are in relationship to each other, so it’s no surprise that a few of us have had a tragedy occur: Accidentally pouring water into the bean hopper/grinder instead of the reservoir on our superautomatic espresso machine.

If this happens to you, the most important thing is DO NOT USE THE MACHINE. There is nothing that you can do to fix this because the grinder needs to be taken apart and cleaned as soon as possible to prevent it from seizing up. In this video, Gail shows us what happens when water gets into contact with the grinder and gives us advice on what to do — you know, after we’ve run around screaming in panic.

Share

Call for Reviews: Rancilio Silvia

Over on our new resource website, Brown Bean, we have been working hard on putting up editorial reviews of all kinds of espresso machines. We’ll be eventually expanding the reviews to include other kinds of equipment — grinders, accessories, even coffee — but a big part of us being able to provide a full picture of a machine’s performance is to balance our editorial opinion with user reviews like yours.

If you have a Rancilio Silvia, we’d love it if you could take the time to fill out a review on Brown Bean. You’ll have the opportunity to share your experiences, talk about the pros and cons of the machine and indicate whether or not you recommend it.

We currently have a couple dozen machines listed and reviewed up there, so if you don’t have a Silvia and would like to review your machine, check them out to see if there’s a listing. We’re always adding to it, but if your machine isn’t listed, please email us with the make and model and we’ll promptly list and review it if possible, then let you know when it’s ready for your feedback.

Looking forward to learning more about your thoughts on your equipment!

Share

Crew Review: Bottomless Portafilter

If you’re interested in fine-tuning your grind and tamp — or just really love a good show — the bottomless portafilter provides a great tool for calibrating your technique. In this video, Gail shows us how it’s done.

Share

Crew Review: Quick Mill Anita

A great semi-automatic, heat exchange espresso machine, the Quick Mill Anita gives you all the features of a prosumer machine, but with a little lighter impact on the ol’ wallet. Watch Gail as she walks us through the ins and outs of the Anita and whips us up a latte.

Share

Does Size Matter?

For some of us it does! Especially if you’ve got a snug kitchen into which you’d like to introduce a high-end espresso machine. In this video, Gail and Kat line up several models of machines and measure them out so you can see how they compare, dimension-wise.

Share

Brew Tip: Dialing in Your Grinder

If you’ve just picked up a new grinder or an espresso machine/grinder package and you’re wondering how to get it setup for that perfect shot extraction, check out this video. Gail shows us how to calibrate a grinder with an espresso machine and discusses tips for determining the extraction level and tweaking your puck.

Share

Crew Review: Quick Mill Superautomatic

We’ve had the Quick Mill version of the superautomatic espresso machine on our floor for a few months now, and there are things we really dig about it, balanced by a few minor grievances with the fit and finish. Watch Gail walk us through the good, the bad and the ugly — then make us a latte to show us how it works.

Share

Tech Tip: Water Sensing on Quick Mills & Rockets

We sometimes get calls from folks about their Quick Mill Andreja Premium/Anita or Rocket Giotto Premium+/Cellini having a water sensing issue. Watch Gail discuss how these machines sense water in the reservoir and learn how to resolve this common quirk.

Share

Archives

Categories