Where to Lubricate the Saeco Superautomatic Brew Groups

It’s a good idea to regularly pull out your Saeco superautomatic’s brew group and spray it down with hot water — we recommend doing this once per week and using water only, no soap. Why? Because the soap is going to break down the lubrication on the brew group and you’ll be re-applying it weekly as opposed to twice a year. Ultimately, you’ll be using more than you need to and we’re just thrifty that way.

Gail shows us where to apply the lubricant on the brew group when it is time for a touch up. A general rule of thumb is that if you can see/feel the lubrication on the group, you’re probably as lubricated as you need to be. When applying, don’t put a large quantity into each area; just apply some to a q-tip and then put a light layer. We often see big globs applied that then mix with coffee grounds to make a rather dangerous cement. In this case, you can have too much of a good thing.